Please note custom Marlin sources have been migrated from BitBucket to GitLab. Additionally custom Marlin releases will now be found & hosted at GitLab at the following URL: gitlab.com/oddineers-public/marlin-ender-3/-/releases Except as represented in this agreement, all work featured here by Oddineers is provided “AS IS”. Other than as provided in this agreement, Oddineers makes no other…
This article describes another release for Marlin this version is 2.0.6.1 released 28th August 2020 for use with the Ender 3 Pro and a custom hardware configuration: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch.
This article describes how to compile Marlin 2.0.6 released 27th July 2020 for use with the Ender 3 Pro and a custom hardware configuration comprising of the following components: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR 1.4 board is replacing the Creality Melzi board found in the stock printer.
This article describes how to compile Marlin 2.0.5.4 released 9th July 2020 for use with the Ender 3 Pro and a custom hardware configuration comprising of the following components: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR 1.4 board is replacing the Creality Melzi board found in the stock printer.
The focus of this article is the preparation of the Marlin 2.0.5.3 for use with the Ender 3 Pro and the following configuration: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch.
In this article the focus is the preparation of the Marlin 2.x branch (version 2.0.4.4) for use with the Ender 3 Pro and a custom configuration: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR board that is replacing the Creality Melzi board from the stock printer.
A brief guide on how to utilise PID temperature tuning in Marlin. You will need to ensure that the following definitions are present in your firmware’s configuration to utilise this the temperature tuning functionality:
This article describes another firmware customisation for the Ender 3 Pro utilising Marlin version 1.1.9 with the latest bug fixes. This time enabling automatic bed levelling utilising the BLTouch v3.1. This has been tested on the Ender 3 Pro but should also work for the non-pro variant and possibly other similar 3D printers.
This article describes how to customise the Ender 3 Pro by first flashing a bootloader, then how to compile and flash Marlin version 1.1.9 with the latest bug fixes. Plus the inclusion of some additional functionality such as manual mesh bed levelling. This should work on the Ender 3 Pro and the non-pro variant and…
