Marlin 2.0.8.2, E3D Hemera, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

descriptionStandard

This article describes another release for Marlin this version is based on 2.0.8.2 released 29th May 2021 and prepared for use with an updated custom hardware configuration comprising of the: E3D Hemera Hot-end, the BigTreeTech SKR 1.4 Turbo board, TMC2209 stepper drivers and the BLTouch v3.1. The printer frame and PSU are from a Ender…

Marlin 2.0.8, Ender 3 Pro, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

descriptionStandard

This article describes another release for Marlin this version is 2.0.8 based on the release from 30th April 2021 and prepared for use with the Ender 3 Pro and a custom hardware configuration comprising of the: BigTreeTech SKR 1.4 board, TMC2209 stepper drivers and the BLTouch v3.1 (other versions supported review wiring diagram for your…

Marlin 2.0.6, Ender 3 Pro, BTT SKR 1.4 Turbo board with ABL using BLTouch v3.1

descriptionStandard

This article describes how to compile Marlin 2.0.6 released 27th July 2020 for use with the Ender 3 Pro and a custom hardware configuration comprising of the following components: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR 1.4 board is replacing the Creality Melzi board found in the stock printer.

Marlin 2.0.5.4, Ender 3 Pro, BTT SKR 1.4 Turbo board with automatic bed levelling BLTouch v3.1

descriptionStandard

This article describes how to compile Marlin 2.0.5.4 released 9th July 2020 for use with the Ender 3 Pro and a custom hardware configuration comprising of the following components: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR 1.4 board is replacing the Creality Melzi board found in the stock printer.

Marlin 2.0.4.4, Ender 3 Pro, BTT SKR 1.4 Turbo board with automatic bed levelling using the BLTouch v3.1

descriptionStandard

In this article the focus is the preparation of the Marlin 2.x branch (version 2.0.4.4) for use with the Ender 3 Pro and a custom configuration: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR board that is replacing the Creality Melzi board from the stock printer.

Marlin 1.1.9, Ender 3 Pro and automatic bed levelling using the BLTouch v3.1

descriptionStandard

This article describes another firmware customisation for the Ender 3 Pro utilising Marlin version 1.1.9 with the latest bug fixes. This time enabling automatic bed levelling utilising the BLTouch v3.1. This has been tested on the Ender 3 Pro but should also work for the non-pro variant and possibly other similar 3D printers.