Marlin 2.1.2, E3D Hemera, SKR 1.4T and UBL

descriptionStandard

This article describes a update custom build for the custom firmware “Hemera SKR” based on Marlin 2.1.2 released 18th December 2022 and prepared for use with an updated custom hardware configuration comprising of the: E3D Hemera Hot-end, the BigTreeTech SKR 1.4 Turbo board, TMC2209 stepper drivers and the BLTouch v3.1. The printer frame and PSU…

Marlin 2.0.9.3, E3D Hemera, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

descriptionStandard

This article describes another release for Marlin this version is based on 2.0.9.3 released 25th December 2021 and prepared for use with an updated custom hardware configuration comprising of the: E3D Hemera Hot-end, the BigTreeTech SKR 1.4 Turbo board, TMC2209 stepper drivers and the BLTouch v3.1. The printer frame and PSU are from a Ender…

Marlin 2.0.8.2, E3D Hemera, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

descriptionStandard

This article describes another release for Marlin this version is based on 2.0.8.2 released 29th May 2021 and prepared for use with an updated custom hardware configuration comprising of the: E3D Hemera Hot-end, the BigTreeTech SKR 1.4 Turbo board, TMC2209 stepper drivers and the BLTouch v3.1. The printer frame and PSU are from a Ender…

Marlin 2.0.8, Ender 3 Pro, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

descriptionStandard

This article describes another release for Marlin this version is 2.0.8 based on the release from 30th April 2021 and prepared for use with the Ender 3 Pro and a custom hardware configuration comprising of the: BigTreeTech SKR 1.4 board, TMC2209 stepper drivers and the BLTouch v3.1 (other versions supported review wiring diagram for your…

Marlin 2.x Firmware releases for the Ender 3 Pro, BTT SKR 1.4

descriptionStandard

Please note custom Marlin sources have been migrated from BitBucket to GitLab. Additionally custom Marlin releases will now be found & hosted at GitLab at the following URL: gitlab.com/oddineers-public/marlin-ender-3/-/releases Except as represented in this agreement, all work featured here by Oddineers is provided ​“AS IS”. Other than as provided in this agreement, Oddineers makes no other…

Marlin 2.0.6, Ender 3 Pro, BTT SKR 1.4 Turbo board with ABL using BLTouch v3.1

descriptionStandard

This article describes how to compile Marlin 2.0.6 released 27th July 2020 for use with the Ender 3 Pro and a custom hardware configuration comprising of the following components: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR 1.4 board is replacing the Creality Melzi board found in the stock printer.

Marlin 2.0.5.4, Ender 3 Pro, BTT SKR 1.4 Turbo board with automatic bed levelling BLTouch v3.1

descriptionStandard

This article describes how to compile Marlin 2.0.5.4 released 9th July 2020 for use with the Ender 3 Pro and a custom hardware configuration comprising of the following components: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR 1.4 board is replacing the Creality Melzi board found in the stock printer.