Marlin 2.0.6.1, Ender 3 Pro, BTT SKR 1.4 Turbo board with ABL using BLTouch v3.1

This article describes another release for Marlin this version is 2.0.6.1 released 28th August 2020 for use with the Ender 3 Pro and a custom hardware configuration: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch.

Marlin 2.0.6, Ender 3 Pro, BTT SKR 1.4 Turbo board with ABL using BLTouch v3.1

This article describes how to compile Marlin 2.0.6 released 27th July 2020 for use with the Ender 3 Pro and a custom hardware configuration comprising of the following components: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR 1.4 board is replacing the Creality Melzi board found in the stock printer.

Marlin 2.0.5.4, Ender 3 Pro, BTT SKR 1.4 Turbo board with automatic bed levelling BLTouch v3.1

This article describes how to compile Marlin 2.0.5.4 released 9th July 2020 for use with the Ender 3 Pro and a custom hardware configuration comprising of the following components: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR 1.4 board is replacing the Creality Melzi board found in the stock printer.

Marlin 2.0.5.3, Ender 3 Pro, BTT SKR 1.4 Turbo with automatic bed levelling using the BLTouch v3.1

The focus of this article is the preparation of the Marlin 2.0.5.3 for use with the Ender 3 Pro and the following configuration: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch.

Marlin 2.0.4.4, Ender 3 Pro, BTT SKR 1.4 Turbo board with automatic bed levelling using the BLTouch v3.1

In this article the focus is the preparation of the Marlin 2.x branch (version 2.0.4.4) for use with the Ender 3 Pro and a custom configuration: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch. The BBT SKR board that is replacing the Creality Melzi board from the stock printer.

Marlin 1.1.9, Ender 3 Pro and automatic bed levelling using the BLTouch v3.1

This article describes another firmware customisation for the Ender 3 Pro utilising Marlin version 1.1.9 with the latest bug fixes. This time enabling automatic bed levelling utilising the BLTouch v3.1. This has been tested on the Ender 3 Pro but should also work for the non-pro variant and possibly other similar 3D printers.

Marlin 1.1.9, Ender 3 Pro and manual mesh bed levelling

This article describes how to customise the Ender 3 Pro by first flashing a bootloader, then how to compile and flash Marlin version 1.1.9 with the latest bug fixes. Plus the inclusion of some additional functionality such as manual mesh bed levelling. This should work on the Ender 3 Pro and the non-pro variant and possibly other similar printers from Creality.