Marlin 2.1.2, E3D Hemera, SKR 1.4T and UBL

This article describes a update custom build for the custom firmware “Hemera SKR” based on Marlin 2.1.2 released 18th December 2022 and prepared for use with an updated custom hardware configuration comprising of the: E3D Hemera Hot-end, the BigTreeTech SKR 1.4 Turbo board, TMC2209 stepper drivers and the BLTouch v3.1. The printer frame and PSU are from a Ender 3 Pro (v1).

Note: this release changes ABL from bilinear to UBL (unified bed levelling).

This release is intended for use with the E3D Hemera Hot-end but can be adjusted to accommodate your own custom hardware configurations.

Disabling Digital Wellbeing on Android 13

The Digital wellbeing application from Google is baked in to Google derived Android 13 devices. If you don’t like the idea of your device usage data being even more closely monitored and disguised as being good for you this brief article will show you how to remove it without root.

Marlin 2.0.9.3, E3D Hemera, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

This article describes another release for Marlin this version is based on 2.0.9.3 released 25th December 2021 and prepared for use with an updated custom hardware configuration comprising of the: E3D Hemera Hot-end, the BigTreeTech SKR 1.4 Turbo board, TMC2209 stepper drivers and the BLTouch v3.1. The printer frame and PSU are from a Ender 3 Pro (v1).

This release is intended for use with the E3D Hemera Hot-end.

BookStack HTML Importer

This project was put together to aid in migrating content from Atlassian Confluence to BookStack.

It requires that the Confluence Space in question is first exported to HTML (built-in). Then that HTML can be imported to BookStack using this API helper library.

Marlin 2.0.8.2, E3D Hemera, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

This article describes another release for Marlin this version is based on 2.0.8.2 released 29th May 2021 and prepared for use with an updated custom hardware configuration comprising of the: E3D Hemera Hot-end, the BigTreeTech SKR 1.4 Turbo board, TMC2209 stepper drivers and the BLTouch v3.1. The printer frame and PSU are from a Ender 3 Pro (v1).

Check list on frequent tasks to review after upgrading firmware

A quick reference to common tasks that should be performed on the 3D printer after flashing a new firmware to the device.

The WordPress enqueue system

I recently made a brief overview of the WordPress enqueue system to act as a quick reference for others.

Transcribable for Android available now for early access

We have recently released an early access speech to text application titled Transcribable; it supports the ability capture voice notes as text and share your transcriptions with other applications. Transcribable supports the conversion of speech to text using your Android device or Wear OS device.

The device application collates your transcriptions to a file allowing you to easily refer back to or export notes stored on your device.

Marlin 2.0.8, Ender 3 Pro, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

This article describes another release for Marlin this version is 2.0.8 based on the release from 30th April 2021 and prepared for use with the Ender 3 Pro and a custom hardware configuration comprising of the: BigTreeTech SKR 1.4 board, TMC2209 stepper drivers and the BLTouch v3.1 (other versions supported review wiring diagram for your variant).

Marlin 2.0.7.2, Ender 3 Pro, BTT SKR 1.4 Turbo with ABL using BLTouch v3.1

This article describes another release for Marlin this version is 2.0.7.2 based on the release from 22nd October 2020 for use with the Ender 3 Pro and a custom hardware configuration: BigTreeTech SKR 1.4 board, TMC2209 drivers, BLTouch v3.1 (others supported check wiring).